Análisis de la refrigeración de un componente electrónico//Analysis of cooling an electronic component

Authors

  • Yunesky Masip Macía Pontificia Universidad Católica de Valparaíso, Escuela de Ingeniería Mecánica. Quilpué
  • Asier Bengoechea García Pontificia Universidad Católica de Valparaíso, Escuela de Ingeniería Mecánica. Quilpué
  • Julio Ortega Calderón Pontificia Universidad Católica de Valparaíso, Escuela de Ingeniería Mecánica. Quilpué

Abstract

En este artículo se realizó un estudio experimental sobre la refrigeración de un componente electrónico mediante la combinación de un flujo cruzado y un chorro incidente empleando aire como fluido refrigerante. En el mismo se persigue caracterizar la refrigeración del componente electrónico mediante la obtención del número de Nusselt promedio sobre cada una de las caras del componente y de forma global. Debido a esto se determina el efecto que posee la relación entre el número de Reynolds del chorro y el del canal sobre la refrigeración del componente electrónico. Para el análisis y caracterización de la refrigeración se ha diseñado y construido un túnel de viento donde se realizan los experimentos sobre la configuración de refrigeración.

Palabras claves: lujo bifásico, número de Reynolds, burbuja aislada, tren de burbujas, coeficientes de arrastre, fuerzas de arrastre.
______________________________________________________________________________

Abstract

The paper presents an experimental study on the cooling of an electronic component. The cooling process was performed by the combination of a cross-flow and an impinging jet using air as coolant. The aim is the characterization of the refrigeration of an electronic cooling through the obtention of the average Nusselt number on each face and the whole component. T he influence of the Reynolds number jet-to-channel ratio on the cooling process was determined. A wind tunnel was designed and built for the analysis and characterization of the refrigeration.

Key words: electronic cooling, cross flow, impinging jet.

Downloads

How to Cite

1.
Masip Macía Y, Bengoechea García A, Ortega Calderón J. Análisis de la refrigeración de un componente electrónico//Analysis of cooling an electronic component. Ing. Mec. [Internet]. 2015 May 1 [cited 2025 Sep. 13];18(2):116-21. Available from: https://ingenieriamecanica.cujae.edu.cu/index.php/revistaim/article/view/516

Issue

Vol. 18 No. 2 (2015): mayo-agosto

Section

Original article

License

Authors who publish with this journal agree to the following terms:

a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).