Modelo para diseñar y simular sistemas renovables de energía para calentar agua a dos niveles de temperatura//Model to design and simulate renewables energy systems to hot water to two temperature level

Authors

  • Joel Morales Salas Instituto Superior Politécnico José Antonio Echeverría, Centro de Estudio de Tecnologías Energéticas Renovables. La Habana
  • Conrado Moreno Figueredo Instituto Superior Politécnico José Antonio Echeverría, Centro de Estudio de Tecnologías Energéticas Renovables. La Habana
  • Johannes Mario Pfann Universidad Tecnológica de Múnich, Facultad de Mecánica. Múnich

Abstract

Para esta investigación se obtuvo un modelo para el diseño y simulación de sistemas renovables de energía para producir agua caliente para diferentes temperaturas de uso, de bajo nivel de temperatura, hasta 60 oC, y de medio nivel de temperatura, hasta 100 oC, en zonas aisladas de las redes eléctricas. El modelo propuesto lleva a cabo simulaciones de diferentes configuraciones de sistemas de energía para determinar cuál es la más apropiada. Se obtuvo el diseño final y diferentes simulaciones de dos casos de estudio para una demanda energética, y se analizan los resultados alcanzados.

Palabras claves: modelo, diseñar, simular, sistemas renovables de energía, agua caliente.
______________________________________________________________________________

Abstract

For the investigation paper was carried out a model for the design and simulation of renewable energy systems to produce hot water for different temperatures of use, of low level, until 60 ºC, and medium level, until 100 ºC, in isolated zone of electric grid. The proposed model carries out simulations to different configurations of energy system to determine which the most appropriate. The final design and different simulations of two case studies for energy demand was obtained, and the results achieved are analyzed.

Key words: model, design, simulate, renewable energy system, hot water.

Downloads

How to Cite

1.
Morales Salas J, Moreno Figueredo C, Mario Pfann J. Modelo para diseñar y simular sistemas renovables de energía para calentar agua a dos niveles de temperatura//Model to design and simulate renewables energy systems to hot water to two temperature level. Ing. Mec. [Internet]. 2015 May 1 [cited 2025 Sep. 13];18(2):129-38. Available from: https://ingenieriamecanica.cujae.edu.cu/index.php/revistaim/article/view/518

Issue

Vol. 18 No. 2 (2015): mayo-agosto

Section

Original article

License

Authors who publish with this journal agree to the following terms:

a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).