Establecimiento del cálculo del diámetro de cresta exterior de un engranaje cónico con técnicas de grafos. // Procedure for the calculation of outer tip diameter on straight bevel gear by means of graphs technique.

Authors

  • G. González Rey Instituto Superior Politécnico José Antonio Echeverría (ISPJAE). Facultad de Ingeniería Mecánica. Departamento de Mecánica Aplicada Calle 116 s/n, CUJAE, Marianao 15, Ciudad de la Habana, Cuba. Teléfono: (537)-2602267, Fax: (537)-2677129

Abstract

Mediante un modelo matemático son dadas las principales relaciones entre los parámetros geométricos básicos requeridos
en la evaluación del diámetro de cresta exterior de un engranaje ortogonal de ruedas cónicas con dientes rectos y suma de
correcciones radiales iguales a cero. Adicionalmente, serán brindados algunos resultados que asocian la correspondencia
entre una geometría racional y la capacidad de carga de un engranaje cónico con restricciones del diámetro de cresta
exterior. Para la determinación de los procedimientos de cálculo, los problemas planteados sobre los modelos matemáticos
han sido serán representados por medio de grafos bicromáticos.


Palabras claves: Engranajes cónicos, diseño racional, modelo matemático.

_______________________________________________________________________________

Abstract:
By means of a mathematical model, the main relations for the evaluation of the outer tip diameter on straight bevel
gear with sum of the profile shift coefficients equal to zero are given. Additionally, some results associated with a
rational geometry and high load capacities of straight bevel gear with restrictions in the outer tip diameter are
presented. For the determination of the calculation procedures based on mathematical models was used the
technique of representation by means of graphs.


Key words: Straight bevel gear, rational design, mathematical models, graphs technique.

Downloads

How to Cite

1.
González Rey G. Establecimiento del cálculo del diámetro de cresta exterior de un engranaje cónico con técnicas de grafos. // Procedure for the calculation of outer tip diameter on straight bevel gear by means of graphs technique. Ing. Mec. [Internet]. 2007 Sep. 1 [cited 2025 Sep. 13];10(3):33-9. Available from: https://ingenieriamecanica.cujae.edu.cu/index.php/revistaim/article/view/137

Issue

Vol. 10 No. 3 (2007): september-december

Section

Original article

License

Authors who publish with this journal agree to the following terms:

a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)

> >>