Deposición metálica de Stellite grado 6 sobre AISI 316 en superficies planas mediante soldadura por fricción. // Metallic deposition of Stellite degree 6 on AISI 316 in plane surfaces by means of friction welding.

Authors

  • J. Cabello Eras Centro de Estudio y Desarrollo de la Oleohidráulica y la Neumática Universidad de Cienfuegos Carretera a Rodas , km. 2, Cienfuegos.
  • R. Goytisolo Espinosa Centro de Estudio y Desarrollo de la Oleohidráulica y la Neumática Universidad de Cienfuegos Carretera a Rodas , km. 2, Cienfuegos.
  • V. Carreras Martínez Centro de Estudio y Desarrollo de la Oleohidráulica y la Neumática Universidad de Cienfuegos Carretera a Rodas , km. 2, Cienfuegos.

Abstract

En el presente trabajo se realiza un estudio del proceso de deposición metálica de Stellite grado 6 sobre una superficie de
acero inoxidable AISI 316 a través de la soldadura por fricción. Se estudiaron distintas combinaciones de parámetros de
soldadura tales como, velocidad de rotación de la barra de material de aportación, velocidad transversal del sustrato, tiempo
de calentamiento, presión de apriete de la barra contra el sustrato y los depósitos obtenidos son sometidos a un análisis
metalográfico en la zona de interfase y a una prueba de doblado para comprobar su adhesión al metal base.


Palabras claves: Soldadura por fricción, depósitos metálicos.

_____________________________________________________________________________

Abstract
Presently work carried out a study of the process of metallic deposition of Stellite degree 6 on a surface of stainless
steel AISI 316 through the welding by friction. Different combinations of welding parameters were studied as:
rotation speed of the contribution material bar, sustain traverse speed, time of heating, pressure of the bar against
the sustain. The obtained deposits are subject to metalografic analysis in the interface area and to bending test in
order to check their adhesion to the metal bases.


Key words: Friction welding, metallic deposits.

Downloads

How to Cite

1.
Cabello Eras J, Goytisolo Espinosa R, Carreras Martínez V. Deposición metálica de Stellite grado 6 sobre AISI 316 en superficies planas mediante soldadura por fricción. // Metallic deposition of Stellite degree 6 on AISI 316 in plane surfaces by means of friction welding. Ing. Mec. [Internet]. 2003 Jan. 1 [cited 2025 Sep. 13];6(1):17-22. Available from: https://ingenieriamecanica.cujae.edu.cu/index.php/revistaim/article/view/238

Issue

Vol. 6 No. 1 (2003): january-april

Section

Original article

License

Authors who publish with this journal agree to the following terms:

a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)

> >>