Modelo de motor de inducción agregado aplicado en caracterización energética//Aggregate induction motor model applied in energetic characterization
Abstract
La caracterización energética de motores de inducción se dificulta por el volumen de mediciones y cálculo a realizar cuando el número de motores es superior a la decena. En este trabajo se desarrolló un modelo de motor de inducción agregado que permite la caracterización energética equivalente al grupo de motores. El modelo de motor de inducción agregado se obtuvo por balance de potencia entre el equivalente y los motores individuales en régimen estacionario. Se utilizó la herramienta SimPowerSystem de MATLAB en la simulación del motor agregado y los motores individuales para determinar el comportamiento energético ante las cargas acopladas y comparar los resultados. Los cambios en las cargas de los motores individuales originaron respuestas en las magnitudes del motor agregado con errores menores del 5 % comparada con las respuestas resultantes del grupo de motores, concluyendo que el agregado respondió satisfactoriamente y existe una equivalencia con fines energéticos al grupo de motores.Palabras claves: motor de inducción, motor de inducción agregado, caracterización energética.
______________________________________________________________________________
Abstract
The energetic characterization of induction motors is difficult by the volume of measurement and calculation to carry out when the number of motors is bigger than the tens. In this work developed a model of aggregate induction motor that allows the equivalent energy characterization to a group of motors. The
model of aggregate induction motor was obtained by the balance of powers between the equivalent one and the individual motors in steady-state. Used the toolbox SimPowerSystem of MATLAB the aggregate motor and the individual motors are simulated, to determine the energy behavior before the coupled loads
and to compare the results. Changes in the individual motors loads originated answers in the magnitudes of the motor aggregate with errors smaller than 5% compared with the resulting answers of the group of motors, showing that the aggregate responds satisfactorily and exists an equivalence with energy
conclusions to the group of motors.
Key words: induction motors, aggregate induction motors, energetic characterization.
Downloads
How to Cite
1.
Romero-Rueda I, Pérez-Mena BM, Gómez-Sarduy JR. Modelo de motor de inducción agregado aplicado en caracterización energética//Aggregate induction motor model applied in energetic characterization. Ing. Mec. [Internet]. 2012 Sep. 1 [cited 2025 Sep. 13];15(3):213-2. Available from: https://ingenieriamecanica.cujae.edu.cu/index.php/revistaim/article/view/431
Issue
Section
Original article
License
Authors who publish with this journal agree to the following terms:a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).