Carros jaula ferroviarios: determinación de un escalón en diámetro para el reacondicionamiento de sus ejes//Railroad cars for sugar cane transportation: determination of a new level of reconditioning to extend its life
Abstract
El transporte por ferrocarril de caña constituye una variante económica y Cuba cuenta con la infraestructura vial para este fin. El trabajo tiene el objetivo de incrementar la vida útil del eje de los carros jaula, usados en el transporte de la caña de azúcar, a partir de escalones en diámetro para el reacondicionamiento en sus muñones. Se determinó el diámetro mínimo permisible en la zona del muñón
para las condiciones más severas de explotación a las que se expone el eje. El cálculo se realizó según las normas ferroviarias, basado en las ecuaciones clásicas de resistencia de los materiales, además del cálculo de tensional y deformacional utilizando el Método de Elementos Finitos. Los resultados permiten concluir que la propuesta de establecer el diámetro mínimo de 95,25 mm cumple con las condiciones necesarias de resistencia, obteniéndose un coeficiente de reserva dentro del rango establecido por las normas ferroviarias.
Palabras claves: ferrocarril, eje, muñón, elementos finitos.
_______________________________________________________________________________
Abstract
The railway transportation of sugar cane is an economic variant and Cuba has the railroad infrastructure for this purpose. This paper deals with the shaft exploitation period increasing for the sugar cane cars, by obtaining a new reduced dimension in the stump diameter, under the most hard exploitation conditions.
The calculation was carried out according to the railway standards, based on the Strength of Materials classic equations. The tensional and deformational level was also obtained, by using the Finite Element Method. The authors conclude that the minimal proposed diameter 95,25 mm responds to the necessary strength conditions, with a security coefficient, according to the required railway standards.
Key words: railroad, shaft, stump, finite element.
Downloads
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Dirección editorial: 